Dental multilayer zirconia preshaded blank for lab dental 3D Pro zirconio block for aestheticr estoration , D98 * 20 inch
Zirconia Block Introduction
Flyin 3D zirconia block dental is a new multilayer full contour zirconia that can be used for all cases. To produce this new
material . we have invested a lot of time and effort to collaborate in-depth with the raw material producer to meet four demanding.
criteria:
1. Anterior translucency for incisors (total light transmission rate over 50%)
2. A multilayer color gradient (6 layers)
3. High strength to support the bridge restorations (700Mpa-1050Mpa)
4. High fracture toughness to resist chipping (reach 5 Mpa m1/2)
Product Features
Safety:No irritation,No corrosion,Good bio-compatibility
Beauty:Natural teeth color can be reproduced
Comfortability:Low thermal conductivity,hot and cold changes do not stimulte the pulp
Durability:Over 1600MPa perturbed strength, durable and useful
♠ 6 layers Multilayer color
♠ From 43% to 57% gradient for transparency
♠ Strength shows gradient from 700 Mpa to 1200 Mpa
♠ Suitable for anterior, crown, 7 unit bridges and all restoration
Available shades and sizes of dental consumables 3D pro zirconia block:
| Open System | Zironzahn System | Amann Girrback | Available Shades |
| 98*10mm | 95*10mm | 89*71*10mm | A1-D4, BL1, BL2, BL3 |
| 98*12mm | 95*12mm | 89*71*12mm | A1-D4, BL1, BL2, BL3 |
| 98*14mm | 95*14mm | 89*71*14mm | A1-D4, BL1, BL2, BL3 |
| 98*16mm | 95*16mm | 89*71*16mm | A1-D4, BL1, BL2, BL3 |
| 98*18mm | 95*18mm | 89*71*18mm | A1-D4, BL1, BL2, BL3 |
| 98*20mm | 95*20mm | 89*71*20mm | A1-D4, BL1, BL2, BL3 |
| 98*22mm | 95*22mm | 89*71*22mm | A1-D4, BL1, BL2, BL3 |
| 98*25mm | 95*25mm | 89*71*25mm | A1-D4, BL1, BL2, BL3 |
Features of 3D Pro Multilayer Zirconia Block:
1. Sintered Density of multilayer zirconia block: 6.07 ± 0.03g/cm3
2. Outstanding aesthetics – highly esthetic, monolithic single-tooth and bridge restorations in the anterior and posterior region.
3. Translucency of multilayer zirconia block 43-57%, adjusted translucency gradient ensures good coverage in the cervical area and increased translucency in the incisal area.
4. The integrated color gradient also ensures the efficient fabrication of natural-looking restorations.
5. Extensive color selection – 19 colors (Blench, A1-D4).
6. Bending Strength of multilayer zirconia block:700-1200 MPa
7. Hardness of multilayer zirconia block 1200HV
8. Wide range of indications – from single-tooth restoration to multi-unit bridge.
9. Self-colored dental multilayer zirconia block
10. CAD CAM digital system
Product Description:
FLYIN 3D Pro multilayer zirconia block is the most high end class zirconia block, the most nature zirconia block, which changes color(from dark to light) , strength( from 700mpa-1200mpa), and translucency(43%-57%) gradually from cervical to incisal part at one zirconia block.
This multilayer zirconia block can make both posterior teeth and anterior teeth. One zirconia block to cover all indications.
Our zirconia blocks are compatible with different kinds of CAD/CAM system and manual system, such as Cercon system, Sirona Inlab system, KaVo system, Wieland system and Amann Girrbach AG system.
We choose the best zirconia powder and utilize a cold isostatic pressing system to form shapes,the main advantage of isostatic pressing is the uniform application of pressure, which lead to a very homogeneous density and shrinkage,yielding a very reproducible process.The production cost by using isostatic pressing is much higher than uniaxel dry pressing, but quality is also much higher.We try to provide high quality ,low cost zirconia blocks for all dental CAD/CAM milling system, support open architecture CAD/CAM milling system. We will sell lowest price on zirconia blocks and highest quality to all labs worldwide.
Technical Parameters:
| Product Attributes | 3D pro multilayer Zirconia Block |
| Product Name | Hybrid Ceramic Blocks, Dental Zirconia Blocks |
| Color | multilayer |
| Chemical Solubility | <100 μg/cm² |
| Vickers Hardness | >1200 HV |
| Sintering Temperature | 1500℃ |
| Radioactivity | Low |
| Size | D98mm |
| Flexural Strength | 700-1200 MPa |
| Translucency | 43-57% |
| Indications | 5-7 unit bridges, full arch abutment ,implant bridge etc. |
| Thickness | D98mm |
Applications:
Veneer
Posterior crown
Full crown bridge
Anterior crown
InlayFull contour screw retained bridge
Full arch crown bridge
Implant
Company
Flyin is a high-tech dental materials and equipment company that produces dental zirconia discs, glass ceramics, scanners, 3D printers, milling machines and sintering furnaces, and other consumables.
Technical team
Flyin has a strong professional technical team,56% of its members are senior professional biological experts and intelligent CNC experts.Also,Yurucheng cooperate with many famous Chinese institutes to introduce advanced production technology from home and abroad.
International cooperation
Flyin establish cooperation with many large denture processing center and oral hospitals,get outstanding performance in the field and earn good reputation among technicians and patients.
Product equipment
Our products are ceramic denture zirconia block,corresponding CADCAM equipment,3D printing equipment and other related oral products.As professional oral materials supplier,we can provide digital dental materials,dental equipment,dental software and full range of digital products and services.
Product Tags:
|
|
Preshaded Dental Multilayer Zirconia Block 3D Pro For Aestheticr Estoration Images
|
